MULTISWITCH 5 WIRE CASCADE 12 OUTPUTS ACTIVE
DS/SMK55123FA
1
- The SAT-IF signals are amplified
- TERR-RF (85 … 862 MHz) signals are amplified
- Return path (5 … 65 MHz) is passive
- The SAT-IF polarity selection is controlled by remote voltage, < 14 VAC = vertical / > 16 VAC = horizontal and the 22 kHz tone
provided by the receiver - Has a DC jack for remote power by the DS/SNG18/1000, if the Launch Amplifier would not provide remote power voltage for FTA amplification
- LED operation display
- The supply of the active TERR-RF is possible via trunk line 0 (18 V / 90 mA), from the launch amplifier or the optional
- Power Inserter Single 18V 1A (DS/SNG18/1000)
- Ground clamp
POWER INSERTER SINGLE 18V 1A
Part Code: DS/SNG18/1000
When required to activate and use the Terrestrial Amplifier in each Multiswitch used in the system, the Multiswitch will have a maximum current draw of 100 mA which is provided by the DS/SNG18/1000. The DS/SNG18/1000 can run up to six Multiswitches effectively and efficiently. We do not recommend exceeding this limit. You can connect additional DS/SNG18/1000 on other Multiswitches to ensure each Multiswitch has sufficient power.
| Specifications |
DS/SMK55123FA |
| Inputs / Outputs SAT-IF / TERR-RF | 5 / 5, 4 / 1 |
| Outputs / Subscribers | 12 |
| Through Loss TERR-RF | 5 dB |
| Through Loss SAT-IF | 2 ... 4 dB |
| Tap Loss TERR-RF 5 ... 65 MHz | 22 ... 23 dB |
| Tap Loss TERR-RF 85 ... 862 MHz | 5 ... 3 dB |
| Tap Gain SAT-IF 950 ... 2200 MHz | 0 ... 6 dB |
| Max Output Level TERR-RF 85...862 MHz, 60 dB IMA3 / EN 60728-3 | 90 dBμV |
| Max Output Level SAT-IF 950...2200 MHz, 35 dB IMA3 / EN 60728-3 | 95 dBμV |
| Switching Isolation | ≥ 30 dB |
| Isolation Trunk line / Trunk line | > 30 dB |
| Isolation Receiver / Receiver | ≥ 30 dB |
| Current per Trunk line 0, 2, 3 & 4 | 1 A |
| Current Consumption for Each Receiver Max | 75 mA |
| Ambient Temperature | - 20 ... + 50 °C |
| Dimensions (W x D x H mm) | 130 x 40 x 225 |
FOXTEL: F30684